Specialists in timber & woodturning supplies and UK agent for Vicmarc Products

Chucks

For Chuck inserts please go to Chuck Inserts page

 

VM90

 

VM90 Std Jaws Thread Size Price
V00281-4 M40 X 2 ( Insert Required ) £172.83
V00281-2 M33 X 3.5 ( Direct Thread ) £172.83

The VM 90 STD Jaws comes with: 1 x Standard Jaws, 1 x 3mm T– Bar Allen Key,

1 x Wood Screw, 1 x Users Manual, 2 x 7.9mm (5/16”) Tommy Bars,

Please note the M40 x 2 chuck, an insert is required (not included)

 

VM90 No Jaws Thread Size Price
V00280-4 M40 X 2 ( Insert Required ) £162.69
V00280-2 M33 X 3.5 ( Direct Thread ) £162.69

The VM 90 No Jaws comes with: 1 x 3mm T– Bar Allen Key,

1 x Users Manual, 2 x 7.9mm (5/16”) Tommy Bars,

Please note the M40 x 2 chuck, an insert is required (not included)


 

VM100

  VM 100 STD Jaws Thread Size Price
  V00283-4 M40 X 2 ( Insert Required ) £179.50
  V00283-2 M33 X 3.5 ( Direct Thread ) £179.50

The VM 100 STD Jaws comes with: 1 x Standard Jaws, 1 x 3mm T–Bar Allen Key,

1 x 8mm T–Bar Allen Key, 1 x Wood Screw, 1 x Users Manual,

 

Please not, 1 x 7.9mm (5/16”) Tommy Bar (M40 Only),

M40 x 2 chuck, an insert is required (not included)

 

  VM 100 No Jaws Thread Size Price
  V00282-4 M40 X 2 ( Insert Required ) £169.90
  V00282-2 M33 X 3.5 ( Direct Thread ) £169.90

The VM 100 No Jaws comes with: 1 x 3mm T–Bar Allen Key,

1 x 8mm T–Bar Allen Key, 1 x Users Manual,

 

Please note, 1 x 7.9mm (5/16”) Tommy Bar (M40 Only),

M40 x 2 chuck, an insert is required (not included)


 

VM120

VM 120 STD Jaws Thread Size Price
V00285-4 M45 x 2 ( Insert Required ) £223.13
V00285-2 M33 X 3.5 ( Direct Thread ) £223.13

The VM 120 comes with: 1 x Standard Jaws, 1 x 4mm T–Bar Allen Key,

1 x 10mm T–Bar Allen Key, 1 x Wood Screw, 1 x Users Manual,

 

Please note, 1 x 9.5mm (3/8”) Tommy Bar (M45 Only),

M45 x 2 chuck, an insert is required (not included)

 

VM 120 No Jaws Thread Size Price
V00284-4 M45 x 2 ( Insert Required ) £211.41
V00284-2 M33 X 3.5 ( Direct Thread ) £211.41

The VM 120 No Jaws comes with: 1 x 4mm T–Bar Allen Key,

1 x 10mm T–Bar Allen Key, 1 x Users Manual,

 

Please note, 1 x 9.5mm (3/8”) Tommy Bar (M45 Only),

M45 x 2 chuck, an insert is required (not included)


 

 

Escoulen Chucks (Eccentric Chucks)

Escoulen Chuck #3 Thread size Price
V00295-2 M33 x3.5 £377.85
V00295-5 (insert required) M45 x 2 £377.85

It is supplied with a set of standard accessories,

1 x Tommy bar 7.9mm, 1 x 5mm Allen T-Bar, 1 x 4mm Allen T-Bar, 1 x 4mm Allen L-Bar, 1 x #3 Gauge, 1 x 10mm spanner, 1 x 40mm Cup Chuck, 1 x owner’s manual.

Please note that the V00295-2 chuck does not come with a chuck removal key, use your 41mm AF open end spanner supplied with all Vicmarc Lathes, if using any other lathe with the same thread size, you will need to purchase the spanner, see below.

The V00295-5 chuck does not require the spanner as it’s held onto the lathe by the insert which has a hole drilled in it and a Tommy bar supplied.

Open end spanner 41 AF,  order code V01035, Price….£21.99.

 

 

 

 

 

Our Latest News

Christmas Break

Well it's that time of year again folks and the festivities beckon and we will be taking a wee break over Christmas and New Year.   T Full Story...

Testimonials
I did the one day beginner's course with Andy in July 2014. It was a fantastic day, Andy is a superb teacher who can easily instill confidence into anyone. I found the course to be both extremely interesting and productive. Highly recommended to anyone wishing to take up woodturning.
George Williams, Forres

The Black Isle Woodturning Centre The Old School, Cullicudden, IV7 8LL Scotland IV7 8LL © 2018 Black Isle Woodturning

Tel: 078 4218 9743 Email: